Offline local Blynk server raspberry pi zero w

[eliot60]

I have been building a raspberry pi zero w local server much like this:

TUTORIAL: From (PI) Zero to Local Blynk Server:

Hi Blynkers, We have done this little tutorial to be able to run the Local Blynk Server from Zero. There’re lots of people without knowledge about Raspberry Pi, Raspbian or Lunix, so, I think it could be useful. Keep in mind my own knowledge regarding Raspberry Pi and Linux is very limited, this tutorial is really basic but useful, at least for me… Here we go: 1-Prepare the SD card (8Gb Minimum) to place the Pi operating system on it The SD card MUST be formatted as FAT32, install SDFormat…

But I have trouble actually connecting to my server. So i first got the blynk server working on raspberry pi zero w and could connect to it trough my router. Then I installed DHCP and Hostapd and got that working after some struggling. But right now if I connect to my raspberry pi wifi there is no real ip that I can connect to if I use the command ifconfig -a. Where do I get the right IP adress to actually connect to the server that is running?