Hi please, does the over air (OTA) code updates to esp32 work on non edgent projects? Just trying something for the first time and when I exported the compiled binary it not like the edgent created instead of 1 bin file multiple of them in some build folder
I have these:
.ino.bin
.ino.bootloader.bin
.ino.elf
.ino.map
ino.partitions.bin
Thanks Pete! always the same type it worked with edgent for long time normally now it does not, I’ll try multiple other boards - but there are many of them there
Unfortunately the link isn’t very helpful, because it says “ ESP-32 ESP-32S Similar”, which doesn’t tell us much.
One of the images in that link shows a board that says “ESP32 Devkit V1” on the back. That also seems a bit odd, because the most of the ESP32 Devkit boards available are now V4 rather than V1.
When I use the ESP32 Devkit V4 boards I select “ESP32 Dev Module” as the board type…
When I do that, and compile an ESP32 sketch (with ESP32 Core version 2.0.14 installed) I just get the .ino and .bin files when I export the compiled binary.
also previously it did not matter which board I picked it had always created the bin+ino file and the OTA always worked now I dont know what changed that it wont work
My edgents - all of the codes dont work now as well after the new blynk library - there are many things changed so Im stuck probably for good having my ESP32 still running but with no way updating them with OTA - it is hrad to get to them in my roof
I changed the codes to non edgent which works fine but the OTA not working anymore
I installed to older version IDE but that did not help, tried a different esp32 (I have multiple) also tried just arduino and all of them have the same problem with the OTA the last thing I remember updating was the blynk library - I could revert to very old versions but that is back on trees I guess
I don’t understand any of what you’ve said here.
I thought your issue was multiple files being created by the IDE, which has nothing to do with the board itself or the version of the Blynk library.
well I would not know it has nothing to do with it but I trust you on it, I said it because from last time when it worked I only changed 2 things - updated to newer version of IDE 2… and updated the blynk library nothing else - from that moment the edgent codes wont work and OTA on any codes wont work
Pete but I did explain that just the last message if I use edgent code it would generate one bin file instead of multiple but it still wont work with the OTA