Esp-01 setup error while compilation

[PeteKnight]

@rameshpersuader

I didn’t choose ESP’s bcoz of the limitations of GPIO pins

What limitations are those exactly, how many digital and analogue pins does your project require?

@rameshpersuader

I tried the same getLocalIP() but this is still having limitations as I won’t be able to use !=connected conditions in my sketch

I think you misunderstood what I was saying - try re-reading my previous post.

@rameshpersuader

I would also like to know more about debugging. If you have any links or threads please share them.

Too lazy to search yourself?
Okay, here you go - this time…

https://docs.blynk.cc/#blynk-firmware-debugging

What do the BLYNK_DEBUG Codes(output) mean?

Hi, I can easily enable the BLYNK_DEBUG function, I get multiple prints in the serial monitor - but what do they mean? I can find no documentation about what the debug statements should be telling me? EG: ⸮t|⸮⸮ $⸮⸮⸮4⸮2(h⸮[76] Connecting to GoTigers!_2GEXT [1080] Connected to WiFi [1080] IP: 192.168.0.45 [1080] ___ __ __ / _ )/ /_ _____ / /__ / _ / / // / _ \/ '_/ /____/_/\_, /_//_/_/\_\ /___/ v0.6.1 on ESP8266 [1156] Connecting to blynk-cloud.com:80 [1501] <[1…

@rameshpersuader

Is this not possible in the Arduino mega case?

I think the clue is in the title of the YouTube video… “Enter Blynk Credentials Over the Air in ESP32 or NodeMCU board | ESP32 projects” and I already told you that you can’t do OTA with a Uno or Mega.

Pete.