Android Open Beta. Version 2.27.0 (Image widget)

Yes… but not sure to whom. OK, now that I look at it closer, I am guessing this goes to Google, not Blynk. It is repeatable on any older (than 8.0) Android version device I use though.


No option to send logs in Blynk after restarting the App…

Ok, and could you mention the devices which had crashed - so it will be easier to find the crash reports

The above just happened on an Acer Tablet B1-810, Android ver.4.4.4

I think I also sent one hours ago (and just again now :stuck_out_tongue_winking_eye: ) from a NOX emulator apparently emulating a SM-N950F, Android ver 4.4.2

PS runs just fine for hours if I say on the same project, it is when transitioning between projects that I can get it to crash with great frequency.

Thanks, I’ve found it, I’ll make later a release with crash fixes, and when our server’s will be updated to a next version - I’ll upload a new beta with lots of updates.

1 Like

New build is in the store - it should fix that crash.

We had started the updates of the servers, so it look like tomorrow or on saturday I’ll upload 2.27.1 beta - I’ll add to it ble logging for your LBB


Hello 911 (0118 999 881 99 9119 7253 in the UK :wink: ) … I would like to report the theft of my Android images by the iOS App :scream:

1 Like


how do you get two pictures at image gallery with me only one photo goes down my code

#define BLYNK_PRINT Serial
#include <OneWire.h>
#include <DallasTemperature.h>
#include <SPI.h>
#include <Fishino.h>
#include <BlynkSimpleFishino.h>
int sensorValue = 0;
int value = 0;
int sensorPin = A0;
int bodendata = 0;
#define ONE_WIRE_BUS 2
OneWire oneWire(ONE_WIRE_BUS);    
float tempout = 0;
DallasTemperature sensors(&oneWire);
char auth[] = "261442812e08420cf4c4";
SimpleTimer timer;
char ssid[] = "";
char pass[] = "";
void Temperaturmessung(){
  tempout = (sensors.getTempCByIndex(0));
  Blynk.virtualWrite(V2, tempout);
  if (tempout <24) {
  else if (tempout >24) {
void setup()
  // Debug console
 timer.setInterval(1000L, Temperaturmessung);
  Blynk.begin(auth, ssid, pass);

void loop()

@BlynkAndroidDev Hi Alexander. the eventor input number is invisible :thinking:

1 Like

Thanks, it has been fixed, but I hadn’t enough time for beta release - next week all latest fixes will be in google play, I suppose I will do that on Tuesday

1 Like

@markop Image widget has not “url” property, I have no idea where did you get that code - you need to setup image widget with urls and then send their index value to Image widget’s pin.

Ha… I kept trying that method to no avail… gotta love “fake code” :stuck_out_tongue: On this note… Probably not in the category of “fix”, as much as “feature” but is there, or will there be, a way of populating/editing the URLs in the Image Gallery Widget, from code?

1 Like

Yep, we thought about that.

1 Like

I somehow just noticed this… there is NO option to assign a vPin to this widget??.. Thus no way to send the URL from code. Is this to be added?

1 Like


2019 IMAGE BUTTONS YEAR??? :blush: :thinking:
knob1 onoff_button2


It would be great if there is an option like upload image from the device directly. Its not a friendly way to save image to image gallery via the “Image URL” every time.

@infinitygalaxy007 I moved your post to a more relevant topic. But perhaps you can clarify your question… We can already load an image’s URL from either the App or the Sketch, so very “friendly” to do so, but loading in a direct image file would not work due the IoT nature of the whole Blynk infrastructure… For example, the bandwidth needed to transmit the image via Blynk’s App <-> Server <-> MCU protocol would be prohibitive. And loading it directly from the phone (aka Camera, web clip, etc.) would then require loading the exact same image(s) into each and every phone/tablet used on the project… and that could become much “unfriendlier” overall :stuck_out_tongue_winking_eye:

which widget u are using here for “CONDTION” to show “Mostly Cloudy” message?

Thanks Gurner for ur kind information. I got it now :slight_smile:

That is just the basic Display or Labeled Display Widget showing whatever text you send to it.

The image itself may be found here in this small collection topic.

1 Like

I tested BLE using HM-10 and Arduino Nano

BLE seems to work again, but only with Blynk library until v0.5.4
When using Blynk library v0.6.0, it no longer works because the BLYNK_CMD_LOGIN command has changed from value 2 to 29:


is not recognised anymore “Invalid header type: 2”.

1 Like