I am also having this issue. I am trying to use the SmartLED Controller by Jamin but modified a bit to use my Espressif ESP32 DevKitC rather than a ESP8266.
I got Blynk to work and connected the ESP32 to a project on my phone, and FastLed works on it’s own, but together I get the error message in this comment.
Doing a lot of research on the problem and it’s definitely interrupts. Hope someone sees this soon who is more knowledgeable in the matter.
Error:
ets Jun 8 2016 00:22:57
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:956
load:0x40078000,len:0
load:0x40078000,len:13076
entry 0x40078a58
[54] Connecting to NETGEAR13
[4555] Connected to WiFi
[4555] IP: 192.168.1.28
[4555]
___ __ __
/ _ )/ /_ _____ / /__
/ _ / / // / _ / '/
///_, /////_
/__/ v0.4.10 on ESP32[5001] Connecting to blynk-cloud.com:8442
[5223] Redirecting to 139.59.206.133:8442
[5224] Login timeout
[5224] Connecting to 139.59.206.133:8442
[5565] Ready (ping: 171ms).
[10566] Connecting to 139.59.206.133:8442
[10911] Ready (ping: 171ms).
Guru Meditation Error: Core 0 panic’ed (Interrupt wdt timeout on CPU1)
Register dump:
PC : 0x40085f40 PS : 0x00060834 A0 : 0x80086915 A1 : 0x3ffd5a30
A2 : 0x3ffc10a8 A3 : 0x3ffd5ab8 A4 : 0x00000008 A5 : 0x3ffd9d98
A6 : 0x00000004 A7 : 0x3ffdbd98 A8 : 0x0000abab A9 : 0x0000cdcd
A10 : 0xb33fffff A11 : 0x0000abab A12 : 0x3ffaff58 A13 : 0x00000001
A14 : 0x00060823 A15 : 0x00000000 SAR : 0x00000018 EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x4000c2e0 LEND : 0x4000c2f6 LCOUNT : 0xffffffffBacktrace: 0x40085f40:0x3ffd5a30 0x40086912:0x3ffd5a50 0x400852dd:0x3ffd5a70 0x4011f8a9:0x3ffd5ab0 0x4011fa73:0x3ffd5ae0 0x40120dd7:0x3ffd5b00 0x4012149d:0x3ffd5b20 0x401236fb:0x3ffd5b70
Rebooting…