[SOLVED] Arduino Mega unexpected restart

[Gunner]

@Faben

#define ESP8266_BAUD 9600

Since you are using one of the Mega’s hardware UARTs you could probably set your BAUD to 19200

[SOLVED] Arduino + ESP8266 ESP-01(AI-Cloud, Black Version)

Hi All. Ok It looks like it reliably works when you set the baud rate to 19200 for the esp. The steps i did to get everything work are ass follows. 1.) Flash AT Firmware to esp-01 (Flash Profile i used marked as : Flash size 16Mbit: 512KB+512KB) 2.) Start serial interface on relevant com port at 115200, 8,1,N,N 3.) issue AT command “AT+CWMODE=3” (in putty yo have to press enter then CTRL+J" 4.) Issue AT command “AT+CIPMUX=1” 5.) restart ESP-01 6.) change baud rate with either command “AT…