Well, this does not have to be the truth. He/she is not the only one wich is struggling with this issue. I thought about it, and there is a pretty simple, smart, reliable and cheap way of tricking this “restriction”. I have an idea, but no one on “higher place” to make it happen.
Well, lucky/unlucky - it really depends on things like location, country or competition between IPSs. Somewhere you can get a ton of free public IPs, somewhere you can get one wich you have to pay for, or you even might not be able to get any of ISPs in your reach. You could say lucky, and you could say being on the right place at the right time
I personally don’t believe in “luck”, rather in faith… but it was just meant as simpler figure of (written) speech
However, my focus was on that fact that without the OP doing something at their end (AKA talk to their ISP) to get this WAN access through to their internal networks Local Server… then there is nothing much further that we (this forum) can do, except add words
Exactly as I expected. For you to be able to provide any kind of server the standard way, you have to have public IP address as your second hop. In the output of this command, your first IP address is 192.168.31.1 and your second is 10.161.115.1
The ranges for private addresses is:
10.0.0.0 to 10.255.255.255
172.16.0.0 to 172.31.255.255
192.168.0.0 to 192.168.255.255
Your first IP is from range 192.168. and to have public IP, your second IP has to be not from private range, yet is says 10.x.x.x so you really need to contact your ISP and explain, that you would like to have a server, so you need public IP - not to be behind double NAT.
ISP says I have to pay 4000 rupees(57.38$ aprox) per year to get public ip on rent. It is not possible for me to spend that much. So instead of buying public ip I will buy “Blynk Charge”, since there is no other way left
Thank you everyone for your cooperation.
There are still some possibilites (none of them are free unfortunately, except… ) :
For example you can pay for VPS, and in that you can go as low as 95 Indian rupees and possibly lower, with that, you will get custom blynk server running, free ssl certificates, unlimited “Blynk charge”, and you still got fully functional server, where you can get running for example your own webpage or for running other server applications as well as Domoticz and many others. Search for a “VPS server” (fun fact: VPS stands for VirtualPrivateServer, so it should not be needed to search VPS server, but people still call it like that, another is a LED diodes.) or you can try to find FREE VPS, but honestly, for me it was just waste of time as I was not able to find anything useful. You might be more lucky.
…except I can offer you a solution… sort of. As you might deduced already, I have VPS, and I am able to forward your ports outside of your niggard ISP to my VPS. I will let you do it for free, although, I can not guarantee you that my server will have 100% online time neither that there will be running forever, but if you want it as for test before you buy your own VPS, you can do it. I can help you with the configuration if you shall.
I am tired of doing so many things now I am using Blynk world wide server, I have 58000 blynk charge on it and it is very simple to use. I think it will do the job. If needed I will ask for your help later, thank you.
sir i also want to do same as i created blynk local server on windows but i can only access through my local network
but as u said i have a same router internet ip and public ip shown by www.whatismyip.com
please guide me further
i am confuse should i check for same address using trace rt command ,u mentioned or i have to changed according to my config
if yes then which address are u talking about
You can use this command as it is, just copy and paste. Only the result will differ according to your configuration of network, and this is what I want to see.
In once? okay, but if you encounter problems then do not think I will help you any time, because I too do not have free time anytime I feel like it…
The quick version is:
You first need to make sure everything is working locally,
Then you need to expose the proper port(s) to the internet using port forwarding or similiar function on your router.
After you configure port forwarding sucessfully, you should be able to access forwarded ports from the Internet.
Notice for everyone: All the other cases, detials, requirements and instructions are covered by me or the others in this very thread. So please try to read the whole thread carefully, before asking me the same questions repeatedly! It wastes mine time as well as yours!
who are you man? Dont interfare with us please
please be helpful to my query only
i have tried all the stuffs but i dont know why its not working
i dont want to say like that "my time more valuable than others " but i actually have less time to do all this configuration that why i told them tell me in once ok!!!
i am really sry but actually i have to submit it as soon as possible in my institute thats why i said
i am ready to follow one by one step if you dont mind!!!
