How to setup my Blynk local server so that I can use it from out side my local network

[Msprg]

@ganna.ramu

@Msprg is trying to explain it the right way (correct me if I am wrong)

As I said earlier, this is not so easy as “Just forward those and those, and it will work with a snap of a finger”! Also any service like no-ip.com or dyndns will not work like magic, and thus does not solve everything.
I said:

@Msprg

3. If your router internet IP matches IP displayed by whatismyip website, then you very likely meet first requirement, IF NOT , then it is very likely that you are behind double NAT - read - screwed .

You said:

@amitkray31

yes I have got my public ip. what next?

But then you said:

@amitkray31

My router’s internet IP and Public IP didn’t matches together.

So that looks like you does NOT meet the very first requirement, thus, it is a bit unclear, as how you are replying, so, we can try to test this again, so:

1. Open start menu
2. Search for “cmd”
3. Open application “Command prompt”
4. In the black window wich shold appear, write:
   tracert 80.211.207.110
5. The output copy and pase here as reply to this post, or just take screenshot of the output.

We will see if that helps, good luck.