Auto reset when connected to Blynk 2.0

[PeteKnight]

Are you using Digital datastreams?
If so you should read this…

Constant reboots when using digital pins 6 - 11 with ESP8266 devices

When using an ESP8266 based board (NodeMCU, Wemos D1 Mini, ESP-01 etc) if a digital datastream is added which uses pin 6 to 11 the device will go through a constant cycle of connecting to Blynk then rebooting, like this… 12:50:51.658 -> [68] Connecting to REDACTED 12:50:55.902 -> [4299] Connected to WiFi 12:50:55.902 -> [4299] IP: 192.168.1.6 12:50:55.902 -> [4299] 12:50:55.902 -> ___ __ __ 12:50:55.902 -> / _ )/ /_ _____ / /__ 12:50:55.902 -> / _ / / // / _ \/ '_/ 12:50:…

Pete.