Arduino uno/mega esp8266 wifi shield and blynk

[PeteKnight]

Please replace your screenshots with the serial monitor text, formatted with triple backticks in the same way as your code.

I’d also suggest that you read this…

Understanding hardware and software serial ports

I’m still seeing frequent posts, mostly from new members of the forum, who are confused about how to add WiFi or Bluetooth connectivity to devices like the Arduino Uno, Nano or Mega, or from people who are trying to use serial communication with some other type of peripheral. I thought I’d try to put together some guidance on how to do this properly. First things first though – if you’re using a device such as an Uno, Nano or Mega that doesn’t have built-in internet connectivity then you shoul…

And I would of course suggest that you throw your Uno, Mega and ESP-01 in the bin and use a proper IoT device and maybe a port expander such as this…

Using the MCP23017 IO Expansion Board

EDIT NOVEMBER 2021… Anyone interested in controlling multiple relays may also want to take a look at this topic, which uses a pre-built 16-way relay board and 2x 74hc595 shift registers: END OF EDIT . I had a project recently where I wanted to use 5 physical buttons, with built-in LED indicators, to control 5 relays. That meant having 15 GPIOs available, so I built the project around an ESP32 dev board. I also needed a few more GPIO pins for other sensors, so by the time I was done I was o…

Pete.