BLYNK
BLYNK.IO       📲 GETTING STARTED       📗 DOCS       ❓HELP CENTER       👉 SKETCH BUILDER

Arduino not uploading sketch

I cannot get the arduino to upload the sketch - please assist.
Arduino Uno WiFi Rev2, Blynk Version 0.6.1,

Arduino: 1.8.13 (Windows 10), Board: "Arduino Uno WiFi Rev2, ATMEGA328"



This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

If that’s the full extent of the error message then turn on verbose compilation messages as it suggests.

Pete.

Hi Pete,
Thanks for the reply. The error message is too long, I will send the message in 2 replies.
Thank you

Arduino: 1.8.13 (Windows 10), Board: "Arduino Uno WiFi Rev2, ATMEGA328"

C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\Billy P\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\Billy P\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\Billy P\Documents\Arduino\libraries -fqbn=arduino:megaavr:uno2018:mode=on -vid-pid=03EB_2145 -ide-version=10813 -build-path C:\Users\BILLYP~1\AppData\Local\Temp\arduino_build_792347 -warnings=none -build-cache C:\Users\BILLYP~1\AppData\Local\Temp\arduino_cache_536874 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.arduinoOTA.path=C:\Users\Billy P\AppData\Local\Arduino15\packages\arduino\tools\arduinoOTA\1.3.0 -prefs=runtime.tools.arduinoOTA-1.3.0.path=C:\Users\Billy P\AppData\Local\Arduino15\packages\arduino\tools\arduinoOTA\1.3.0 -prefs=runtime.tools.avrdude.path=C:\Users\Billy P\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17 -prefs=runtime.tools.avrdude-6.3.0-arduino17.path=C:\Users\Billy P\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17 -prefs=runtime.tools.avr-gcc.path=C:\Users\Billy P\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5 -prefs=runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino5.path=C:\Users\Billy P\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5 -verbose C:\Users\Billy P\Documents\Arduino\Arduino_org_UNO_WiFi_Take_2\Arduino_org_UNO_WiFi_Take_2.ino

C:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\Billy P\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\Billy P\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\Billy P\Documents\Arduino\libraries -fqbn=arduino:megaavr:uno2018:mode=on -vid-pid=03EB_2145 -ide-version=10813 -build-path C:\Users\BILLYP~1\AppData\Local\Temp\arduino_build_792347 -warnings=none -build-cache C:\Users\BILLYP~1\AppData\Local\Temp\arduino_cache_536874 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.arduinoOTA.path=C:\Users\Billy P\AppData\Local\Arduino15\packages\arduino\tools\arduinoOTA\1.3.0 -prefs=runtime.tools.arduinoOTA-1.3.0.path=C:\Users\Billy P\AppData\Local\Arduino15\packages\arduino\tools\arduinoOTA\1.3.0 -prefs=runtime.tools.avrdude.path=C:\Users\Billy P\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17 -prefs=runtime.tools.avrdude-6.3.0-arduino17.path=C:\Users\Billy P\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino17 -prefs=runtime.tools.avr-gcc.path=C:\Users\Billy P\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5 -prefs=runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino5.path=C:\Users\Billy P\AppData\Local\Arduino15\packages\arduino\tools\avr-gcc\7.3.0-atmel3.6.1-arduino5 -verbose C:\Users\Billy P\Documents\Arduino\Arduino_org_UNO_WiFi_Take_2\Arduino_org_UNO_WiFi_Take_2.ino

Using board 'uno2018' from platform in folder: C:\Users\Billy P\AppData\Local\Arduino15\packages\arduino\hardware\megaavr\1.8.7

Using core 'arduino' from platform in folder: C:\Users\Billy P\AppData\Local\Arduino15\packages\arduino\hardware\megaavr\1.8.7

Detecting libraries used...

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "C:\\Users\\BILLYP~1\\AppData\\Local\\Temp\\arduino_build_792347\\sketch\\Arduino_org_UNO_WiFi_Take_2.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for WiFiLink.h: [WiFi_Link@1.0.1]

ResolveLibrary(WiFiLink.h)

  -> candidates: [WiFi_Link@1.0.1]

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "C:\\Users\\BILLYP~1\\AppData\\Local\\Temp\\arduino_build_792347\\sketch\\Arduino_org_UNO_WiFi_Take_2.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for BlynkSimpleWiFiLink.h: [Blynk@0.6.1]

ResolveLibrary(BlynkSimpleWiFiLink.h)

  -> candidates: [Blynk@0.6.1]

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\BILLYP~1\\AppData\\Local\\Temp\\arduino_build_792347\\sketch\\Arduino_org_UNO_WiFi_Take_2.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src\\WiFiClient.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src\\WiFiLink.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src\\WiFiServer.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src\\WiFiUdp.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src\\utility\\comm.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src\\utility\\server_drv.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src\\utility\\spi\\spi_drv.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src\\utility\\uart\\SC16IS750.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src\\utility\\uart\\serial.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src\\utility\\uart\\uart_drv.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src\\utility\\wifi_drv.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src\\utility\\BlynkDebug.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src\\utility\\BlynkHandlers.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src\\utility\\BlynkTimer.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src\\utility\\utility.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Generating function prototypes...

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\BILLYP~1\\AppData\\Local\\Temp\\arduino_build_792347\\sketch\\Arduino_org_UNO_WiFi_Take_2.ino.cpp" -o "C:\\Users\\BILLYP~1\\AppData\\Local\\Temp\\arduino_build_792347\\preproc\\ctags_target_for_gcc_minus_e.cpp" -DARDUINO_LIB_DISCOVERY_PHASE

"C:\\Program Files (x86)\\Arduino\\tools-builder\\ctags\\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\\Users\\BILLYP~1\\AppData\\Local\\Temp\\arduino_build_792347\\preproc\\ctags_target_for_gcc_minus_e.cpp"

Compiling sketch...

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\BILLYP~1\\AppData\\Local\\Temp\\arduino_build_792347\\sketch\\Arduino_org_UNO_WiFi_Take_2.ino.cpp" -o "C:\\Users\\BILLYP~1\\AppData\\Local\\Temp\\arduino_build_792347\\sketch\\Arduino_org_UNO_WiFi_Take_2.ino.cpp.o"

Compiling libraries...


The second part of the message is attached.

Compiling library "WiFi_Link"

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src\\WiFiClient.cpp" -o "C:\\Users\\BILLYP~1\\AppData\\Local\\Temp\\arduino_build_792347\\libraries\\WiFi_Link\\WiFiClient.cpp.o"

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src\\WiFiUdp.cpp" -o "C:\\Users\\BILLYP~1\\AppData\\Local\\Temp\\arduino_build_792347\\libraries\\WiFi_Link\\WiFiUdp.cpp.o"

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src\\WiFiServer.cpp" -o "C:\\Users\\BILLYP~1\\AppData\\Local\\Temp\\arduino_build_792347\\libraries\\WiFi_Link\\WiFiServer.cpp.o"

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src\\WiFiLink.cpp" -o "C:\\Users\\BILLYP~1\\AppData\\Local\\Temp\\arduino_build_792347\\libraries\\WiFi_Link\\WiFiLink.cpp.o"

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src\\utility\\comm.cpp" -o "C:\\Users\\BILLYP~1\\AppData\\Local\\Temp\\arduino_build_792347\\libraries\\WiFi_Link\\utility\\comm.cpp.o"

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src\\utility\\server_drv.cpp" -o "C:\\Users\\BILLYP~1\\AppData\\Local\\Temp\\arduino_build_792347\\libraries\\WiFi_Link\\utility\\server_drv.cpp.o"

"C:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\avr-gcc\\7.3.0-atmel3.6.1-arduino5/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega4809 -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO_WIFI_REV2 -DARDUINO_ARCH_MEGAAVR -DUNO_WIFI_REV2_328MODE -DMILLIS_USE_TIMERB3 "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino/api/deprecated" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\cores\\arduino" "-IC:\\Users\\Billy P\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\megaavr\\1.8.7\\variants\\uno2018" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src" "-IC:\\Users\\Billy P\\Documents\\Arduino\\libraries\\Blynk\\src" "C:\\Users\\Billy P\\Documents\\Arduino\\libraries\\WiFi_Link\\src\\utility\\wifi_drv.cpp" -o "C:\\Users\\BILLYP~1\\AppData\\Local\\Temp\\arduino_build_792347\\libraries\\WiFi_Link\\utility\\wifi_drv.cpp.o"

In file included from C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\comm.cpp:27:0:

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\comm.h:40:8: error: 'CommDrv' does not name a type

 extern CommDrv commDrv;

        ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\comm.cpp:29:1: error: 'CommDrv' does not name a type

 CommDrv commDrv;

 ^~~~~~~

In file included from C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:25:0:

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src/utility/comm.h:40:8: error: 'CommDrv' does not name a type

 extern CommDrv commDrv;

        ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp: In static member function 'static void ServerDrv::startServer(uint16_t, uint8_t, uint8_t)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:36:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

In file included from C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:25:0:

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src/utility/comm.h:40:8: error: 'CommDrv' does not name a type

 extern CommDrv commDrv;

        ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp: In static member function 'static void WiFiDrv::getNetworkData(uint8_t*, uint8_t*, uint8_t*)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:59:5: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

     WAIT_FOR_SLAVE_SELECT();

     ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:38:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(START_SERVER_TCP_CMD, PARAM_NUMS_3);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:41:37: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam(&protMode, 1, LAST_PARAM);

                                     ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:41:37: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam(&protMode, 1, LAST_PARAM);

                                     ^~~~~~~~~~

                                     LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp: In static member function 'static void ServerDrv::startClient(uint32_t, uint16_t, uint8_t, uint8_t)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:59:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:62:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(GET_IPADDR_CMD, PARAM_NUMS_1);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:64:22: error: 'DUMMY_DATA' was not declared in this scope

     uint8_t _dummy = DUMMY_DATA;

                      ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:61:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(START_CLIENT_TCP_CMD, PARAM_NUMS_4);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:65:37: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam(&protMode, 1, LAST_PARAM);

                                     ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:64:22: note: suggested alternative: 'SPI0_DATA'

     uint8_t _dummy = DUMMY_DATA;

                      ^~~~~~~~~~

                      SPI0_DATA

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:65:48: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam(&_dummy, sizeof(_dummy), LAST_PARAM);

                                                ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:65:37: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam(&protMode, 1, LAST_PARAM);

                                     ^~~~~~~~~~

                                     LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp: In static member function 'static void ServerDrv::stopClient(uint8_t)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:83:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:65:48: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam(&_dummy, sizeof(_dummy), LAST_PARAM);

                                                ^~~~~~~~~~

                                                LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp: In static member function 'static void WiFiDrv::getRemoteData(uint8_t, uint8_t*, uint8_t*)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:80:5: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

     WAIT_FOR_SLAVE_SELECT();

     ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:85:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(STOP_CLIENT_TCP_CMD, PARAM_NUMS_1);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:83:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(GET_REMOTE_DATA_CMD, PARAM_NUMS_1);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:86:33: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam(&sock, 1, LAST_PARAM);

                                 ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:84:44: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam(&sock, sizeof(sock), LAST_PARAM);

                                            ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:86:33: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam(&sock, 1, LAST_PARAM);

                                 ^~~~~~~~~~

                                 LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp: In static member function 'static uint8_t ServerDrv::getServerState(uint8_t)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:104:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:84:44: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam(&sock, sizeof(sock), LAST_PARAM);

                                            ^~~~~~~~~~

                                            LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp: In static member function 'static void WiFiDrv::wifiDriverInit()':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:101:5: error: 'commDrv' was not declared in this scope

     commDrv.begin();

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp: In static member function 'static int8_t WiFiDrv::wifiSetNetwork(char*, uint8_t)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:106:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:106:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(GET_STATE_TCP_CMD, PARAM_NUMS_1);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:108:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(SET_NET_CMD, PARAM_NUMS_1);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:107:44: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam(&sock, sizeof(sock), LAST_PARAM);

                                            ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:109:49: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam((uint8_t*)ssid, ssid_len, LAST_PARAM);

                                                 ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:107:44: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam(&sock, sizeof(sock), LAST_PARAM);

                                            ^~~~~~~~~~

                                            LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp: In static member function 'static uint8_t ServerDrv::getClientState(uint8_t)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:125:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:109:49: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam((uint8_t*)ssid, ssid_len, LAST_PARAM);

                                                 ^~~~~~~~~~

                                                 LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp: In static member function 'static int8_t WiFiDrv::wifiSetPassphrase(char*, uint8_t, const char*, uint8_t)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:129:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:131:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(SET_PASSPHRASE_CMD, PARAM_NUMS_2);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:132:49: error: 'NO_LAST_PARAM' was not declared in this scope

     commDrv.sendParam((uint8_t*)ssid, ssid_len, NO_LAST_PARAM);

                                                 ^~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:127:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(GET_CLIENT_STATE_TCP_CMD, PARAM_NUMS_1);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:128:44: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam(&sock, sizeof(sock), LAST_PARAM);

                                            ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:133:50: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam((uint8_t*)passphrase, len, LAST_PARAM);

                                                  ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:133:50: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam((uint8_t*)passphrase, len, LAST_PARAM);

                                                  ^~~~~~~~~~

                                                  LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp: In static member function 'static int8_t WiFiDrv::wifiSetKey(char*, uint8_t, uint8_t, const void*, uint8_t)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:153:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:128:44: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam(&sock, sizeof(sock), LAST_PARAM);

                                            ^~~~~~~~~~

                                            LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp: In static member function 'static uint16_t ServerDrv::availData(uint8_t)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:146:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:155:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(SET_KEY_CMD, PARAM_NUMS_3);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:156:49: error: 'NO_LAST_PARAM' was not declared in this scope

     commDrv.sendParam((uint8_t*)ssid, ssid_len, NO_LAST_PARAM);

                                                 ^~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:148:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(AVAIL_DATA_TCP_CMD, PARAM_NUMS_1);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:149:44: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam(&sock, sizeof(sock), LAST_PARAM);

                                            ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:158:43: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam((uint8_t*)key, len, LAST_PARAM);

                                           ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:149:44: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam(&sock, sizeof(sock), LAST_PARAM);

                                            ^~~~~~~~~~

                                            LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp: In static member function 'static bool ServerDrv::getData(uint8_t, uint8_t*, uint8_t)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:167:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:158:43: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam((uint8_t*)key, len, LAST_PARAM);

                                           ^~~~~~~~~~

                                           LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp: In static member function 'static void WiFiDrv::config(uint8_t, uint32_t, uint32_t, uint32_t)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:177:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:169:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(GET_DATA_TCP_CMD, PARAM_NUMS_2);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:179:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(SET_IP_CONFIG_CMD, PARAM_NUMS_4);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:180:50: error: 'NO_LAST_PARAM' was not declared in this scope

     commDrv.sendParam((uint8_t*)&validParams, 1, NO_LAST_PARAM);

                                                  ^~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:171:29: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam(peek, LAST_PARAM);

                             ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:171:29: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam(peek, LAST_PARAM);

                             ^~~~~~~~~~

                             LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp: In static member function 'static bool ServerDrv::getDataBuf(uint8_t, uint8_t*, uint16_t*)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:194:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:183:45: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam((uint8_t*)&subnet, 4, LAST_PARAM);

                                             ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:183:45: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam((uint8_t*)&subnet, 4, LAST_PARAM);

                                             ^~~~~~~~~~

                                             LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp: In static member function 'static void WiFiDrv::setDNS(uint8_t, uint32_t, uint32_t)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:201:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:196:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(GET_DATABUF_TCP_CMD, PARAM_NUMS_1);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:197:45: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendBuffer(&sock, sizeof(sock), LAST_PARAM);

                                             ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:203:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(SET_DNS_CONFIG_CMD, PARAM_NUMS_3);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:204:50: error: 'NO_LAST_PARAM' was not declared in this scope

     commDrv.sendParam((uint8_t*)&validParams, 1, NO_LAST_PARAM);

                                                  ^~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:197:45: note: suggested alternative: 'LAST_ACK'

     commDrv.sendBuffer(&sock, sizeof(sock), LAST_PARAM);

                                             ^~~~~~~~~~

                                             LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp: In static member function 'static bool ServerDrv::insertDataBuf(uint8_t, const uint8_t*, uint16_t)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:217:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

 

Number three attached.

 WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:206:50: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam((uint8_t*)&dns_server2, 4, LAST_PARAM);

                                                  ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:206:50: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam((uint8_t*)&dns_server2, 4, LAST_PARAM);

                                                  ^~~~~~~~~~

                                                  LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp: In static member function 'static int8_t WiFiDrv::disconnect()':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:226:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:219:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(INSERT_DATABUF_CMD, PARAM_NUMS_2);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:221:47: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendBuffer((uint8_t *)data, _len, LAST_PARAM);

                                               ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:221:47: note: suggested alternative: 'LAST_ACK'

     commDrv.sendBuffer((uint8_t *)data, _len, LAST_PARAM);

                                               ^~~~~~~~~~

                                               LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp: In static member function 'static bool ServerDrv::sendUdpData(uint8_t)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:243:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:228:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(DISCONNECT_CMD, PARAM_NUMS_1);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:230:22: error: 'DUMMY_DATA' was not declared in this scope

     uint8_t _dummy = DUMMY_DATA;

                      ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:230:22: note: suggested alternative: 'SPI0_DATA'

     uint8_t _dummy = DUMMY_DATA;

                      ^~~~~~~~~~

                      SPI0_DATA

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:231:35: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam(&_dummy, 1, LAST_PARAM);

                                   ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:231:35: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam(&_dummy, 1, LAST_PARAM);

                                   ^~~~~~~~~~

                                   LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp: In static member function 'static uint8_t WiFiDrv::getConnectionStatus()':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:248:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:245:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(SEND_DATA_UDP_CMD, PARAM_NUMS_1);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:246:44: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam(&sock, sizeof(sock), LAST_PARAM);

                                            ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:246:44: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam(&sock, sizeof(sock), LAST_PARAM);

                                            ^~~~~~~~~~

                                            LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp: In static member function 'static bool ServerDrv::sendData(uint8_t, const uint8_t*, uint16_t)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:269:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:251:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(GET_CONN_STATUS_CMD, PARAM_NUMS_0);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp: In static member function 'static uint8_t* WiFiDrv::getMacAddress()':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:269:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:271:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(SEND_DATA_TCP_CMD, PARAM_NUMS_2);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:273:46: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendBuffer((uint8_t *)data, len, LAST_PARAM);

                                              ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:272:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(GET_MACADDR_CMD, PARAM_NUMS_1);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:273:46: note: suggested alternative: 'LAST_ACK'

     commDrv.sendBuffer((uint8_t *)data, len, LAST_PARAM);

                                              ^~~~~~~~~~

                                              LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp: In static member function 'static uint8_t ServerDrv::checkDataSent(uint8_t)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:302:3: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

   WAIT_FOR_SLAVE_SELECT();

   ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:274:22: error: 'DUMMY_DATA' was not declared in this scope

     uint8_t _dummy = DUMMY_DATA;

                      ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:274:22: note: suggested alternative: 'SPI0_DATA'

     uint8_t _dummy = DUMMY_DATA;

                      ^~~~~~~~~~

                      SPI0_DATA

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:275:35: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam(&_dummy, 1, LAST_PARAM);

                                   ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:275:35: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam(&_dummy, 1, LAST_PARAM);

                                   ^~~~~~~~~~

                                   LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp: In static member function 'static char* WiFiDrv::getCurrentSSID()':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:309:5: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

     WAIT_FOR_SLAVE_SELECT();

     ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:304:3: error: 'commDrv' was not declared in this scope

   commDrv.sendCmd(DATA_SENT_TCP_CMD, PARAM_NUMS_1);

   ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:305:42: error: 'LAST_PARAM' was not declared in this scope

   commDrv.sendParam(&sock, sizeof(sock), LAST_PARAM);

                                          ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\server_drv.cpp:305:42: note: suggested alternative: 'LAST_ACK'

   commDrv.sendParam(&sock, sizeof(sock), LAST_PARAM);

                                          ^~~~~~~~~~

                                          LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:312:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(GET_CURR_SSID_CMD, PARAM_NUMS_1);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:314:22: error: 'DUMMY_DATA' was not declared in this scope

     uint8_t _dummy = DUMMY_DATA;

                      ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:314:22: note: suggested alternative: 'SPI0_DATA'

     uint8_t _dummy = DUMMY_DATA;

                      ^~~~~~~~~~

                      SPI0_DATA

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:315:35: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam(&_dummy, 1, LAST_PARAM);

                                   ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:315:35: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam(&_dummy, 1, LAST_PARAM);

                                   ^~~~~~~~~~

                                   LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp: In static member function 'static uint8_t* WiFiDrv::getCurrentBSSID()':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:332:5: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

     WAIT_FOR_SLAVE_SELECT();

     ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:335:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(GET_CURR_BSSID_CMD, PARAM_NUMS_1);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:337:22: error: 'DUMMY_DATA' was not declared in this scope

     uint8_t _dummy = DUMMY_DATA;

                      ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:337:22: note: suggested alternative: 'SPI0_DATA'

     uint8_t _dummy = DUMMY_DATA;

                      ^~~~~~~~~~

                      SPI0_DATA

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:338:35: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam(&_dummy, 1, LAST_PARAM);

                                   ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:338:35: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam(&_dummy, 1, LAST_PARAM);

                                   ^~~~~~~~~~

                                   LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp: In static member function 'static int32_t WiFiDrv::getCurrentRSSI()':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:353:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:356:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(GET_CURR_RSSI_CMD, PARAM_NUMS_1);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:358:22: error: 'DUMMY_DATA' was not declared in this scope

     uint8_t _dummy = DUMMY_DATA;

                      ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:358:22: note: suggested alternative: 'SPI0_DATA'

     uint8_t _dummy = DUMMY_DATA;

                      ^~~~~~~~~~

                      SPI0_DATA

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:359:35: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam(&_dummy, 1, LAST_PARAM);

                                   ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:359:35: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam(&_dummy, 1, LAST_PARAM);

                                   ^~~~~~~~~~

                                   LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp: In static member function 'static uint8_t WiFiDrv::getCurrentEncryptionType()':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:376:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:379:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(GET_CURR_ENCT_CMD, PARAM_NUMS_1);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:381:22: error: 'DUMMY_DATA' was not declared in this scope

     uint8_t _dummy = DUMMY_DATA;

                      ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:381:22: note: suggested alternative: 'SPI0_DATA'

     uint8_t _dummy = DUMMY_DATA;

                      ^~~~~~~~~~

                      SPI0_DATA

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:382:35: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam(&_dummy, 1, LAST_PARAM);

                                   ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:382:35: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam(&_dummy, 1, LAST_PARAM);

                                   ^~~~~~~~~~

                                   LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp: In static member function 'static int8_t WiFiDrv::startScanNetworks()':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:400:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:403:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(START_SCAN_NETWORKS, PARAM_NUMS_0);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp: In static member function 'static uint8_t WiFiDrv::getScanNetworks()':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:425:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:428:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(SCAN_NETWORKS, PARAM_NUMS_0);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp: In static member function 'static uint8_t WiFiDrv::getEncTypeNetowrks(uint8_t)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:455:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:458:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(GET_IDX_ENCT_CMD, PARAM_NUMS_1);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:460:40: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam(&networkItem, 1, LAST_PARAM);

                                        ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:460:40: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam(&networkItem, 1, LAST_PARAM);

                                        ^~~~~~~~~~

                                        LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp: In static member function 'static int32_t WiFiDrv::getRSSINetoworks(uint8_t)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:481:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:484:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(GET_IDX_RSSI_CMD, PARAM_NUMS_1);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:485:40: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam(&networkItem, 1, LAST_PARAM);

                                        ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:485:40: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam(&networkItem, 1, LAST_PARAM);

                                        ^~~~~~~~~~

                                        LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp: In static member function 'static uint8_t WiFiDrv::reqHostByName(const char*)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:501:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:504:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(REQ_HOST_BY_NAME_CMD, PARAM_NUMS_1);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:505:63: error: 'LAST_PARAM' was not declared in this scope

     commDrv.sendParam((uint8_t*)aHostname, strlen(aHostname), LAST_PARAM);

                                                               ^~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:505:63: note: suggested alternative: 'LAST_ACK'

     commDrv.sendParam((uint8_t*)aHostname, strlen(aHostname), LAST_PARAM);

                                                               ^~~~~~~~~~

                                                               LAST_ACK

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp: In static member function 'static int WiFiDrv::getHostByName(arduino::IPAddress&)':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:528:2: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

  WAIT_FOR_SLAVE_SELECT();

  ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:530:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(GET_HOST_BY_NAME_CMD, PARAM_NUMS_0);

     ^~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp: In static member function 'static char* WiFiDrv::getFwVersion()':

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:566:4: error: 'WAIT_FOR_SLAVE_SELECT' was not declared in this scope

    WAIT_FOR_SLAVE_SELECT();

    ^~~~~~~~~~~~~~~~~~~~~

C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link\src\utility\wifi_drv.cpp:568:5: error: 'commDrv' was not declared in this scope

     commDrv.sendCmd(GET_FW_VERSION_CMD, PARAM_NUMS_0);

     ^~~~~~~

Using library WiFi_Link at version 1.0.1 in folder: C:\Users\Billy P\Documents\Arduino\libraries\WiFi_Link 

Using library Blynk at version 0.6.1 in folder: C:\Users\Billy P\Documents\Arduino\libraries\Blynk 

exit status 1

Error compiling for board Arduino Uno WiFi Rev2.

And what does your sketch look like?

Pete.

Make sure to select the right board type.

Hi Pete,
The sketch - here it comes …


/* Comment this out to disable prints and save space */
#define BLYNK_PRINT Serial

/* Fill-in your Template ID (only if using Blynk.Cloud) */
//#define BLYNK_TEMPLATE_ID   "Arduino"


#include <WiFiLink.h>
#include <BlynkSimpleWiFiLink.h>

// You should get Auth Token in the Blynk App.
// Go to the Project Settings (nut icon).
char auth[] = "lCOSUJsD3Xwyfdv1NdzF3uaZabzuuyto";

// Your WiFi credentials.
// Set password to "" for open networks.
char ssid[] = "TP-Link_1000";
char pass[] = "67541706";

void setup()
{
  // Debug console
  Serial.begin(9600);

  Blynk.begin(auth, ssid, pass);
  // You can also specify server:
  //Blynk.begin(auth, ssid, pass, "blynk-cloud.com", 80);
  //Blynk.begin(auth, ssid, pass, IPAddress(192,168,1,100), 8080);
}

void loop()
{
  Blynk.run();
}

try to use wifinina library

Hi John93,
WiFiNINA Version 1.8.13 is installed.
Regards

Okay, what about the board type ?
What did you choose ?

I would have expected to see something like this:

#include <WiFiNINA.h>
#include <BlynkSimpleWiFiNINA.h>

Rather than this…

Pete.

It’s all there in the IDE compilation message in first post and the third post…

Pete.

Hey there.

I’ll try something and I will let you know if the sketch successfully uploaded.

Greetings.

Hi John93,
Thank you, I am out of the office for a few days but try the solution offered asap
Regards

I tried and it worked. I uploaded the sketch successfully.

Yes Sir,
Thank you, I got my sketch to upload but I have another issue to solve.
The app on my phone does not control the Arduino pin designated.
The app on my phone indicates that the Arduino is online.
I have rebooted and reloaded the sketch on the Arduino and recycled my phone.
Any suggestions ?
Regards

Are you using virtual or digital pins?

Pete.

Hi Pete,
I am back at it … no luck.
I am using digital pins.
Regards

I’d always recommend using virtual pins.

Pete.