Problems controlling specific 433 MHz rc sockets

[Msprg]

@distans

What kinda 433MHz transmitter/receiver do you have on the WeMos?

I am using these: https://www.aliexpress.com/item/1pair-2pcs-433mhz-rf-transmitter-and-receiver-kit-For-Wireless-Power-switch-socket-remote-control-LED/32311933574.html

Pretty cheap, but it is doing its job. I have other few 433MHz sockets working with this transmitter just fine, wich codes I sniffed with the receiever, and its working so far so good.

@PeteKnight

If you do want to get into decoding weird and wonderful 433MHz devices then sooner or later you’ll end-up using the audio input of your PC and software like Audacity (it’s free!) to analyse the transmission timings.
I was extremely skeptical about this approach when I was trying to decode the signals for my 433MHz window blinds, but having tried all the digital solutions I could find with no success I finally turned to the analogue audio input and had the signal protocol identified and reproduced very quickly.

I have a RTL-SDR on hand and I have some recordings, that i was looking at via Audacity, but… I was not looking “hard enough”(?), because I did not figured out anything. If you think, you can do better, I can send you the recordings.