My Blynk apps on NOTE 4 acting strangely. Finally I did one project and there are two different projects, depending on what type of Internet connection use (WiFi or GSM). There are different: name of the Project, layout, auth token, sharing and left energy. Did someone meet with similiar problem? For this reason my Project (initially turning home lighting) is useless… Did I somewhere make a mistakes? The Project Blynk I consider the best in the market at this point, so help me please Blynkers.
Does blynk-cloud.com resolve to different IP addresses? If so, that is probably your problem. Try to use the IP address instead of the blynk-cloud.com using the custom server button on the home screen of Blynk.
Exactly what I say. It may be possible the blynk-cloud.com resolves to different IP addresses. Try to find out on which network it resolves to what IP address and post that here.
When I add manually IP address on the home screen (46.101.143.225 - IP blynk-cloud.com) and las hour it’s OK. Now I can switching between GSM and local WiFi (the same where Arduino is mounted) and my project working good. I hope that now will always be good. I do not understand why the default application’s settings did not work well…
Thanks for your helping hand!
Nope. I changed nothing on arduino and get error messages form serial monitor:
0] Blynk v0.3.7 on Arduino Uno
[0] Getting IP…
[1629] IP:192.168.0.100
[5001] Connecting to blynk-cloud.com:8442
[14393] Connecting to blynk-cloud.com:8442
[15050] Invalid auth token
[19755] Connecting to blynk-cloud.com:8442
[20401] Invalid auth token
[25111] Connecting to blynk-cloud.com:8442
[25754] Invalid auth token
…
Reset Arduino not working. I have no idea. Is there problem with blynk-cloud server?
Hello, yes, this is blynk server bug. Quick fix would be - ping blynk-cloud.com from network where your hardware is. Take IP and put it in mobile app. That’s it. Sorry fro inconveniences.
Pinging blynk-cloud.com [46.101.143.225] with 32 bytes of data:
Reply from 46.101.143.225: bytes=32 time=37ms TTL=53
Reply from 46.101.143.225: bytes=32 time=39ms TTL=53
Reply from 46.101.143.225: bytes=32 time=55ms TTL=53
Reply from 46.101.143.225: bytes=32 time=40ms TTL=53
Ping statistics for 46.101.143.225:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 37ms, Maximum = 55ms, Average = 42ms
Pinging blynk-cloud.com [188.166.177.186] with 32 bytes of data:
Reply from 188.166.177.186: bytes=32 time=288ms TTL=40
Reply from 188.166.177.186: bytes=32 time=287ms TTL=40
Reply from 188.166.177.186: bytes=32 time=288ms TTL=40
Reply from 188.166.177.186: bytes=32 time=288ms TTL=40
Ping statistics for 188.166.177.186:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 287ms, Maximum = 288ms, Average = 287ms
When I used 46.101.143.225 (port 8443), my project name was Smart Home (correct project, where initial energy balance was 3.000). But when I used 188.166.177.186 (port 8443), I had Salon LED (old wrong project) and as said harshgp I deleted all project (one project). With clear Blynk I have initial energy balance 1.800.
So which IP address is correct?
Forgive me for my absence, but I had a holiday. I solved my problem giving the IP (46.101.143.225) in the mobile application settings and changing blynk-cloud.com in BlynkConfig.h to IP. For two weeks, everything works properly. Thanks for your help.