Perfect Costas!!!
Just for your knowledge:
The new QR has been made using APP 2.6.0 and Local Server 2.21.5
I’m going to update the first post with this QR
Regards!
Not a good idea to mix and match, 2.6.0 requires 0.21.6.
@psoro this is was very tiny release (few commits only), so I just put jar within same release tag. Fixed. Sorry for confusing.
Eugene, thanks much! I updated iOS app to latest and refreshed QR…sketch with setProperties works as designed with no crashes.
Crazy dinner at home because of Blynk!
I have updated my server and everything should be fine right now.
QR updated
@Costas,
Could you check last QR and URL?
The URL is asking me for more energy despite I’m full of energy…
Edit:
And suddenly the project has appeared…
@BlynkAndroidDev? Any suggestion? Thanks
That is normal, just ignore the Energy top up request.
Hi Blynkers,
I have updated a little bit the code (there was a bug at “UP TO YOU” mode… sorry) and the QR / URL due to new RTC mechanism.
This code is fine for:
Blynk Library: v0.4.4
Android APP: 2.6.0
Local Server 0.21.6
Kind regards!
Hi, well done a nice project. I downloaded and installed your project onto my ESP hardware and connect to the Blynk Cloud.
However when I interrogate the time my time it is " Current time: 0:2:22 1 1 1970" I cant seem to sync the time from the Cloud.
I see you run the project from your local server so this may not be an issue for me. Did you experience similar problems?
Regards
Les (Badge)
Nicely done, may I ask why you chose to use the 5v modules?
I found on ebay both the step down to 3.3V
and the 3.3v relay, is there an advantage to having it at 5v when the mcu operates at 3.3v?
this would require a step down converter from 5 to 3.3V + a transistor for the relay?
Edit: Just asking before I make my purchase, incase I overlooked something. Don’t take it in any wrong way ^.^.
Ping @psoro
Hi @Fettkeewl,
I have no time right now to post the BOM but I’m feeding the Esp using the ASM1117 3.3V and using a transistor for the relay. Everything is at this little board.
I will post the schematic also.
Regards!
hello friend, how much energy it takes for this project? congratulations for the work
great, really a great project.
It would be possible to implement the function to remember the last state of the pin and then re-enable the device when it was on before the restart?
thank you so much
This is already available. Check the docs for “sync state”
Hi, this is just awesome., there is a small issue
i have set the time zone to india and it works for all modes but for ALL Days
it changes to Europe Madrid.
I want to put it for my Aquarium , schedule lights for all day
Also, can all of my 4 relays be scheduled in this manner. ??
Also, i noticed when the hardware goes offline. it does not get the current status of buttons pressed.